Nelson Equipment Edge Of Docks

Menu Directory

Drop Down Menu Drop Down Menu Drop Down Menu Drop Down Menu

Nelson Equipment Company, Inc.

Edge-of-Dock Levelers

"DL" Series Mechanical Edge-of-Dock
The DLM "DL" series edge-of-dock leveler mounts to the exterior dock face providing a simple and economical alternative to "portable plates" or "pit style" levelers. The DL is ideal for the motor freight industry or those companies with standardized trailer bed heights. Each DL series model meets or exceeds as industry recommended working range of +/-3" and a maximum operating range of +/-5" above or below dock. To operate the unit, you simply position the DL lifting hook into the lip recess and pull up. By pushing the lifting hook forward as the leveler descends onto the truck bed allows the release and separation of the lifting hook. The DL is offered in deck widths of 66", 72", & 78" with total unit widths (including bumpers) of 104", 110", & 116". Standard capacities are 20K, 25K, & 30K CIR (comparative industry rating).
Features: •Dual-extension spring lift mechanism •DL series lifting hook •Cold-rolled steel hinge pins for added strength and long life •High-strength steel safety tread plate •Milled lip edge for smooth tire rollover •Secondary gussets for added strength and extended life •Full width distribution bar for extra durability •Heavy-Duty bumper block assemblies with Tuf-Cord rubber bumpers 4"x12"x13" •Bumper projection = 15"

"TS" Series Mechanical Edge-of-Dock
DLM TS Series Edge-of-Docks are an economical choice costing even less than a comparably-rated portable plate. The advantage of the TS series Edge-of-Dock leveler is the ergonomically friendly positioning of the unit onto the truck bed. They're easy and safe to operate, doing away with the heavy lifting generally associated with "hook style" EOD's. The TS series features a compact counter balance making it ideal for recessed leveler installations. They have relatively few moving parts, so maintenance is easy and durability is outstanding. The TS is offered in deck widths of 66", 72", 78", & 84" with total unit widths (including bumpers) of 104", 110", 116", & 122". Standard capacities are 20K, 25K, 30K, & 35K CIR (comparative industry rating). Features: •Ideal for recessed applications •Torsion spring lift mechanism •Heavy-duty self-storing steel leveler with EZ grip handle •Roller-bearing lift mechanism for easy lifts •Cold-rolled steel hinge pins for added strength and long life •Grease fittings •High-strength steel safety tread plate •Milled lip edge for smooth rollover •Torsion gussets for added strength and extended life •Full width distribution bar for extra durability •Heavy-duty bumper blocks assembles with "Tuf-Cord"™ rubber bumpers 4"x12"x13" •Bumper projection = 15"

"NL" Series Mechanical Edge-of-Dock
The DLM "NL" Series Edge-of-Dock is the state of the art in lever-operated dock levelers. Simply move the lifting lever 50° away from dock edge, and then return the lever to its original vertical position. The ergonomically friendly activation of the NL Series leveler eliminates the awkward lifting and leaning over the dock motions found on competitive units. The NL is offered in deck widths of 66", 72", 78", & 84" with total unit widths (including bumpers) of 104", 110", 116", & 122". Standard capacities are 20K, 25K, 30K, & 35K CIR (comparative industry rating). Features: Dual-extension spring lift mechanism Heavy-duty self-storing steel lever with EZ grip handle Roller-bearing lift mechanism for easy lifts Cold-rolled steel hinge pins for added strength and long life Grease fittings High-strength steel safety tread plate Milled lip edge for smooth rollover Secondary gussets for added strength and extended life Full width distribution bar for extra durability Heavy duty bumper block assemblies with "Tuf-Cord"™ 4"x12"x13" rubber bumpers Bumper projection = 15"

"HED" Series Hydraulic Edge-of-Dock
The DLM HED Series Edge-of-Dock is a full featured, fully hydraulic choice for your Edge-of-Dock requirements. The HED Series Edge-of-Dock is safe, easy to operate and requires minimal maintenance over the life of the product. A single push button controls both leveler extension and retraction functions and permits the operator an ergonomically advantaged position to operate the leveler. A choice of single or three Phase voltage is available. The HED is offered in deck widths of 66", 72", 78" & 84" with total unit widths (including bumpers) of 104", 110", 116", & 122". Standard capacities are 20K, 25K, 30K, & 35K CIR (comparative industry rating). Features: Single push button control panel Cold-rolled steel hinge pins for added strength and long life Grease fittings High-strength steel safety tread plate, minimum 55,000 PSI yield strength Milled lip edge for smooth rollover Fully hydraulic lip & deck cylinders Heavy duty bumper block assemblies with "Tuf-Cord"™ 4"x12"x13" rubber bumpers Bumper projection = 18"
"HNL" Series
The DLM HNL Series Edge-of-Dock combines the convenience of hydraulics with the simplicity of the Neverlift® exclusive lip extension mechanism to create an affordable push button alternative. The HNL is operated with a NEMA 12 control panel that raises the platform. Lip operation is controlled by our exclusive mechanical "Neverlift"® technology. Unique to the NHL is the ability to operate mechanically by simply removing a pin, reducing potential downtime in the event of a power failure. The HNL is offered in deck widths of 66", 72", 78" & 84" with total unit widths (including bumpers) of 104", 110", 116", & 122". Standard capacities are 20K, 25K, 30K, & 35K CIR (comparative industry rating). Features: Push Button Control Panel Manual activation in case of power failure Cold-rolled steel hinge pins for added strength and long life Grease fittings High-strength steel safety tread plate, 55,000 PSI yield strength Milled lip edge for smooth rollover Secondary gussets for added strength and extended life Economic hydraulic activation with mechanical lip extensions Heavy duty bumper block assemblies with "Tuf-Cord"™ 4"x12"x13" rubber bumpers Bumper projection = 15"
"Top-of-Dock" Edge-of-Dock
The Top-of-Dock by DLM is economical, allowing you to improve loading dock efficiency at a fraction of the cost of pit-mounted dock levelers. The Top-of-Dock is easy to install on virtually any existing dock and maintenance is reduced to simple, periodic lubrication and adjustment. Operation is easy - whether you choose mechanical or hydraulic operation. Mechanical Operation (SM-500) Four extension spring lift mechanism Milled lip edge for smooth rollover Cold-rolled steel hinge pins for added strength and longer life Grease fittings throughout High-strength steel safety tread plate, 70,000 PSI yield Secondary gussets for added strength and extended life Heavy duty bumper blocks with 4"x12"x13" "Tuf-Cord"™ Bumpers Hydraulic Operation (HSM-500) Nema 4 push button control panel Cold-rolled steel hinge pins for added strength and longer life Grease fittings throughout High-strength steel safety tread plate, 70,000 PSI yield Secondary gussets for added strength and extended life Heavy duty bumper blocks with 4"x12"x13" "Tuf-Cord"™ Bumpers Fully hydraulic lip & deck cylinders

Return

Solutions for Your Material Handling Needs
TKO Dock Doors offers a wide range of overhead doors suitable for a variety of applications. TKO’s line of specialty and impactable dock doors are designed to provide optimal energy efficiency at a lower total cost of ownership. With unique features such as a patented track, panel, plunger and weatherseal system, TKO Doors have the potential to help facilities realize substantial energy savings and reduced maintenance costs.

Nelson Equipment Company • 800-523-6199

Contact Us

1-800-523-6199

Features:

Features:

Features:

Mechanical Operation (SM-500)

Hydraulic Operation (HSM-500)