necinewsletter

NECI Family grows by over 9 pounds!

Scott & Tracy Callihan are proud to introduce their newest addition to their family, Katie Christine was born on July 3^rd and weighed in at 9 pounds 6.1 ounces and 20-1/2 inches long. Tracy & Katie are doing fine. Scott on the other hand is a little perplexed as he is now out numbered 4 girls to 1. Cheer up Scott! Just think about all that wedding cake you will get to eat in your future.

Our congratulations go out to Scott & Tracy along with our best wishes. When you see Scott out in the mornings with blood shot eyes and a Red Bull in his hand…you now know the rest of the story.
Click For Larger View

Regional Distribution Center Reduces
Maintenance Costs, Increases Security

As a regional distributor to their company owned grocery stores, this food distribution company new it had problems on its docks. The existing doors in the facility had years of service behind them and the cost to maintain them had increased to epidemic proportions. Not to mention that when a door failed in the up position, the facility could not be secured and when the door failed in the down position, the dock location was rendered useless. Both are not good scenarios when you have trucks scheduled to be loaded and unloaded continuously during the day and every door is needed.

Thus began a process to evaluate a solution to the problem. It was understood that a replacement door design was required that would be able to withstand impact from forklifts and have the ability to be repaired by the personnel on the docks without having to contact a maintenance person or outside contractor. This company began by securing recommendations from outside professionals and Nelson Equipment Co., Inc. was invited to present a solution. The solution that was recommended by NECI was the MxV door manufactured by DL Manufacturing. The customer presented a sample of the product for review and then NECI along with other companies installed their door in the facility to be evaluated in real life situations. After several months of evaluations, NECI and the MxV door was selected as the supplier of choice.

During the evaluation time, a special door requirement arose which called for the replacement of an oversized door that had to be powered. NECI rose to the challenge by providing an MxV door design that would satisfy the requirement.

The initial contract award was for twenty-two doors. Not all doors were the same size so Nelson surveyed the entire facility and identified each dock location uniquely. The installation of these doors where completed in May of this year and resulted in an additional contract for ten more doors.

If your facility is experiencing constant dock door repairs, contact the professionals at Nelson Equipment Company. They will set up a time to evaluate your situation and make a recommendation that will correct these costly and burdensome maintenance problems.

Click On Photos For A Larger View

Powerfully Simple And Making Loading Docks More Efficient

LoadHog addresses the critical issues of general warehousing facilities at a lower total cost of ownership than conventional solutions.

Operational Simplicity

Operator steps on release pedal and gently pushes forward.
Lip is easily repositioned for end-loading using the operating handle.
Requires only approximately 38 lbs. of lifting force to store.
Maximizes security, cleanliness and floor space.
Has fewer parts and requires minimal lubrication at only two points for superior cost of ownership.
Operates from a standing position - No bending over required.

Minimizes Energy Loss

Energy loss costs companies thousands of dollars annually. At the loading dock, energy loss occurs as air travels out through the gaps between the mechanical leveler deck and the walls of the concrete pit when the leveler is stored. Conventional brush and neoprene leveler weatherseal is not a complete deterrent and is often damaged or missing.

LoadHog allows the loading dock door to be closed tight against the floor. No Pit means no gaps where energy can be lost.

Promotes Cleanliness

General warehousing facilities need to maintain high standards of cleanliness throughout their facilities. The loading dock is no exception, and LoadHog’s unique design actually promotes cleanliness.

No pit means no sanitary issues related to debris build-up or pest infiltration.
Small footprint allows easy access for cleaning and routine maintenance.
Because there’s no pit, spray wash down procedures can be completed more efficiently.

LoadHog is a simple solution that saves companies money…

No pit or concrete work is required. LoadHog installs on the surface of the loading dock floor and the face of the dock with (12) heavy-duty anchors. No concrete work means less expense and easier installation.
LoadHog has fewer parts and only requires lubrication at two points that can be accessed from inside the building.
LoadHog is easy to use and only requires approximately 38 pounds of lifting force to raise and store the unit. LoadHog also provides comparable working range and operational capabilities of a mechanical dock leveler.

Watch
The
Video

4Front Unveils Mobile Showroom

An industry first from 4Front Engineered Solutions", is how Gary Forger,
Editorial Director of Modern Material Handling magazine describes 4Front’s new 53’ long mobile showroom. He’s right and since it’s unveiling in February, the trailer has captured the attention of the national media and hundreds of material handling customers.

The trailer, which is equipped with a 48’ long slide-out that projects 48", is designed to be set-up at a customer’s location within 10 minutes. The inside of the trailer houses over 15 models of equipment and state-of-the-art electronics including a satellite dish which can access web cams located in the Carrollton, TX and Reynosa, Mexico facilities.

In the first 10 weeks on the road, 14 distributors in the Southwest and Southeast have introduced the trailer and our products to just over 170 customers. Customers’ reaction to the trailer has been overwhelming and the quotes and orders generated are beyond initial expectations.

Bottom line, customers are getting the full picture of the innovative loading dock and door solutions that 4Front and its distinguished distributor network can provide via the most innovative sales / educational tool in the industry.

Contact Us To Schedule A "Trailer Trip" To Your Facility

USED HYDRAULIC SCISSOR LIFT

Like new is this Hydraulic Scissor Lift Table. 24”x48” platform with a 2,000 pound capacity. Control Power is 208VAC but could be changed to suit application. This equipment is in excellent condition and ready for immediate delivery. F.O.B.- Shreveport, LA.

If purchased new: $2,600.00

Special Clearance price: $1,500.00

Nelson Equipment Company, Inc. has additional used pallet rack and bulk shelving in stock for immediate shipment. This material can be purchased in small quantities.

Contact Kurt Nelson at 318-688-9970 for more information on these products.