NECI Provides a Smooth Ride for Customer
Satisfaction
Intralox,
a modular plastic belt manufacturer in Harahan, LA, needed a
way to transport pallets and carts from the ground level up to
the second floor, where they could then be passed through a
door opening. Robert LePayre of Intralox had worked with
Nelson Equipment Company before, and contacted the company for
a solution. Nelson President Mark Nelson and Sales Engineer
Jonathan Thorne evaluated the products being moved, the
operating environment, operating cycles, safety requirements
and the overall expectations of the customer in order to meet
Intralox's needs. The Wil-Lift machine from Wildeck did just
that.
With
the ability to customize products based upon application,
Wildeck was able to work with Nelson and Thorne to build a
Wil-Lift hydraulic straddle lift for the tight operating
space. The 6 ft. wide by 5 ft. deep platform went from a
vertical lift gate on the ground level up to a double door on
the upper level, operating in sync with safety controls. The
machine allows a smooth transition of product from one level
to the next without disrupting forklift traffic in the area,
despite the pallet-racking to the immediate right of the unit
and additional obstructions to the left.
NECI's
ability to evaluate the customer's needs, coupled with
Wildeck's ability to customize its products, gave Intralox the
solution it needed to comfortably maintain its daily
operations in the tight workspace.
|
Hytrol PLEZD Accumulating Belt Conveyor
Hytrol's
model PLEZD is a heavy-duty plastic belt accumulation
conveyor, ideal for accumulating heavy unitized or palletized
loads. It combines the intelligence of the EZLogic
Accumulation System with the efficiency of the EZDrive System.
The PLEZD utilizes the dependability of the plastic belt to
convey loads considered nonconveyable with conventional
roll-to-roll conveyor, such as flexible plastic pallets,
footed pallets and mis-oriented conventional wooden pallets.
The PLEZD also features:
- Shaft Mounted Drives, no drive chains to maintain
- 13 in. minimum top-of-belt elevation
- Capacity up to 2,000 lbs. per zone
- Soft Start/Soft Stop and Variable Frequency Drive
options available
- Zone Lengths from 30 in. to 120 in.
The
Hytrol model PLEZD provides greater productivity and more
throughput of product in operation. For more information,
please contact NECI at (318) 688-9970.
Steel King Safety Products Protect Your
Investment
Steel
King Industries provides several products to protect
customers' capital investment, as well as to protect employees
in the work environment. The products below not only reduce
capital equipment damage and maintenance costs, they can also
potentially reduce Workers' Compensation claims and insurance
premiums.
|
Steel
Guard
OSHA estimates that there are
68,400 accidents involving industrial trucks each
year, with approximately 90,000 workers suffering
from some type of injury in these accidents. Steel
Guard protective railing is a cost-effective
barrier against the effects of these accidents.
Steel Guard is:
- specifically engineered for fork truck
protection
- prefabricated, eliminating all on-site core
drilling, cutting, welding or painting
- modular, expanding and relocating easily as
needs change
- less costly, due to decreased installation
time and mass production of components.
| |
|
Mega
Guard
Mega Guard is an all-welded steel
protector designed to help keep forklift trucks
and other in-plant vehicles from damaging
facilities and equipment, while protecting
employees. Mega Guard is constructed of rugged 4
in. square by 1/4 in. wall structural steel tubes
welded to 10 in. by 10 in. by 5/8 in. baseplates,
which are prepunched for anchoring to a concrete
surface. The unit is painted with bright yellow
durable powder coat paint. Mega Guard is
prefabricated and installed using anchor bolts.
| |
|
Guard
Dawg
Prevent costly rack damage with
Guard Dawg. The bright yellow units are anchored
to the floor, protecting the vulnerable areas of
your rack rows. Guard Dawg comes in two standard
sizes and can also be ordered in custom sizes.
Right, left or double-ended guards are available
with a 5 in. by 3 in. by 3/8 in. angle to protect
upright columns measuring three or four inches
wide. Anchors and hardware are included.
| |
|
Snap-Guard
Increase
abuse resistance on SK2000 upright columns with
Snap-Guard column protectors, an adjustable column
protector for boltless rack that protects the
upright rack column from forklift damage.
Snap-Guard features a 4-rivet connection that
automatically locks into the upright column and
can be adjusted in 2-inch increments. A remove and
adjust tool to use with the unit is also
available. | |
|
Column
Core
Forklift damage is the core factor
in about 90% of rack failures. Column Core is
available exclusively as a component to Steel
King's SK2000 tubular racks. Column Core features
a double C-shaped column reinforcement, making
your rack five times more impact resistant at the
front corners and sides where the upright is most
vulnerable. Column Core allows you to retain full
beam adjustability, reduces puncturing, buckling
and torsional twisting, and increases the
protection of your equipment without additional
installation
costs. | |
 |
Bestflex Flexible Gravity Conveyor
Model:
B/F300-24-24
Length:
8 ft. to 24 ft.
Adjustable
Conveyor Height: 28-1/2 in. to 41-1/2 in.
Width:
24
in.
Capacity:
300 lbs./ft.
|
